Differences Between Servo Stabilizers and Static Stabilizers Nelerdir?
Although the work of servo voltage regulators and static voltage stabilizer is basically the same, they are quite different devices in terms of structural and technological differences between them. In particular, some companies with low production capacity and technological inadequacy may mislead users for sales purposes and cause the spread of false information about the differences between servo regulators and static regulators due to the negative perceptions they create. Due to the misguided guidance of these companies, it makes it difficult for users to choose between stabilizers and unfortunately, often causes them to make the wrong choice.
Servo stabilizer or static stabilizer? If you cannot decide which is better, let’s try to share the differences between the regulators, item by item, as a manufacturer of both types of regulators. Here are the differences between servo stabilizers and static stabilizers;
Static Regulator General Features:
Latest technology on voltage stabilizers- The correction speed is 5,000 V/sec.
- It is especially successful in feeding sensitive devices.
- It responds to instantaneous peak current.
- The motor type operates smoothly in applications requiring high starting current.
- It is 40% smaller in volume than the servo regulator.
- Their weight is 55% lighter than servo regulators.
- Input and output current information is monitored on the LCD panel.
- Past malfunction records can be kept.
- Since it does not contain an engine, it has an infinite life.
- It has an electronic protection system.
- Their losses are much lower than those of servore regulators. So it saves energy compared to servo regulators.
Servo Regulator General Features:
The product technology is outdated.- The correction speed is 80V/sec. They are not recommended for sensitive devices that are sensitive to instantaneous voltage changes.
- The motor type may be insufficient in applications requiring starting current.
- It is larger in volume and heavier in structure.
- Only voltage is monitored with the help of a digital voltmeter.
- Special measuring instruments must be added to make other measurements.
- Due to the correction made by the engine, wear will occur in the mechanical structure over time.
- Maintenance and repair are needed approximately every 5-10 years.
- It does not have any electronic protection. Voltage Protection unit is optional.
- Energy consumption, especially at idle, is high compared to a static regulator.
İlgili İçerikler: En iyi regülatör markaları, Servo Regülatörler, Statik Regülatörler
Etiketler: Servo regülatör mü statik regülatör mü? Servo ve statik regülatör arasındaki farklar, voltaj regülatörü seçimi